PDA

View Full Version : 93 r1 GT42R, AEM EMS



Blitzkid
01-15-2008, 08:33 PM
Up for sale is my 1993 rx7 r-1 135,xxx miles on chassis, 10,5xx on motor.
I love this car, the look, the sound of the gate and the bov, but I've decided to move onto to something a little more stockish (z06 or 996) for my next project.
The chassis has decent mileage, but this car is perfect, no frame damage, no rust, no dents...it has a bout 1,000 miles on a new paint job.
Mod list

Engine/Performance
3mm apex seals with "monster" streetport,upgraded coolant seals (pineapple racing, i believe) polished UIM and elbow
A-spec tuning GT42R (dual ball bearing, exact turbo is a GT4294 with a 1.15 a/r)
turbo kit, ceramic coated black, comp housing on the turbo is polished
AEM EMS with AEM ait and 5 bar map sensor
TiAl 44mm wastegate
Custom LSE Performance 4-inch exhaust (minimal bends, uses v-bands, has 4-inch flex section with magnaflow "race" muffler)
Blitz EBC (dsbc spec-r)
TiAl 50mm bov
HKS DLI ignition amp
Greddy Elbow
Custom LSE Performance i/c kit, uses a PTE bar/plate core rated too 950hp)
Full three inch stainless i/c piping
ford gt fuel pump (custom walbro, flows over 310lph)
PWR radiator
Greddy P/h/m integrate gauges boost/oil pressure/water temp (gauges are linked, like defi's)
aem wideband
Blitz FATT turbo timer
Apex boost gauge
rx7 store secondary rail with 1680cc injectors
adjustable fuel pressure regulator
ACT street strip clutch (will also include a custom south bend clutch, proven to hold 600+ lb/ft of tq)
Greddy Pulley kit
polished strut tower bar
K+N intake

Others...
DAD racing seats
ADR m-sport wheels 18.8.5 front, 9.5 rear with nitto 555 rubber (85% tread left)
Rays engineering lug nuts
Moroso battery box
rockford 12inch sub/amp combo sunk beneath rear carpet, fully dynamatted, etc
Kenwood c.d player
alpine speakers
Blitz shift knob
Mazdaspeed GT-C front bumper
Sleek headlight conversion
C-west sides and rear bumper
new paint job as of last winter
15% tint all around
drilled front rotors with upgraded pads (axxis ultimate, i believe)
new 5th gear synchro
Specific Pictures and vin upon request...also I worked as a tech for swanny at LSE...this is my personal car and he or any of the guys at the shop can vouch for its condition.

This is a well sorted, built rx-7 r-1 with a pristine body, I'm asking 26,000 obo

Thanks for looking,

Jeff Somers



http://img502.imageshack.us/img502/2776/blackphotoshoot2lp8.jpg (http://imageshack.us)
http://img502.imageshack.us/img502/2776/blackphotoshoot2lp8.f6c7875735.jpg (http://g.imageshack.us/g.php?h=502&i=blackphotoshoot2lp8.jpg)

http://img72.imageshack.us/img72/5882/blackphotoshoot4rs9.jpg (http://imageshack.us)

AJ
01-15-2008, 10:53 PM
I would seriously consider this if I didn't have my car. Sad to see you let it go Jeff, it's a sweet car.

Question though, was everything ever sorted out with the tuning? We never heard of any final numbers.

Blitzkid
01-16-2008, 01:29 AM
she's fully tuned now, just had to wait for some of the other projects swanny was working on to get done. powerband is awesome from 4300~8800 rpm, made about 130 hp more than a stock speed six on wastegate pressure only. I'm waiting on a c16 tune, I'll do it if I can't find a buyer, but believe me 330rwhp (dd dyno) is plenty fast in a 2700 car, I can burn the rear tires through third on the highway :)

RockLobster
01-28-2008, 06:20 PM
I'd hit it.

;) Nice car.

mazdamn02
01-29-2008, 11:32 AM
Want a straight up trade for a mazdaspeed 3 AND a 1988 VW Golf GL? ya? :)

Blitzkid
01-29-2008, 01:46 PM
thanks for the offer, but no thanks. How much are those speed3s going for these days?

upgtx
01-29-2008, 01:48 PM
$23k before taxes and everything... That is actually not a bad trade IMO.

AJ
01-29-2008, 01:57 PM
Damn, that's actually a solid offer in my eyes. One I didn't see coming. lol

mazdamn02
01-29-2008, 02:17 PM
Damn, that's actually a solid offer in my eyes. One I didn't see coming. lol

The offer existed before it went on sale, lol.

Blitzkid
01-30-2008, 11:45 PM
Its better than the guy on rx7club who kept asking me to trade straightup for a 96 integra auto....but then I'd just have to sell two cars, instead of one.

ij1889
01-31-2008, 01:21 AM
what about two 1st gen rx7, one fully original and mechanically perfect with only 36k miles, and the other with out a hood that needs work, and my moms ford escape?

Blitzkid
01-31-2008, 02:39 AM
having enough trouble selling this one. thanks for the offer, but no thanks.

Blitzkid
02-25-2008, 11:57 PM
I'm currently very motivated to sell....how does 22K obo sound to everyone?

upgtx
02-26-2008, 12:05 AM
Sound's good, but I don't have $20+ grand.

ij1889
03-24-2008, 12:40 AM
fawk someone give me a fucking load right now damnit

Young Roids
03-24-2008, 01:00 PM
This is the perfect car for you Ivan.

dmention7
03-24-2008, 01:02 PM
fawk someone give me a fucking load right now damnit

:shibby:

ij1889
03-24-2008, 05:10 PM
damn, i just realized i spelled that wrong, shit, just as long as james dont read this im good

Blitzkid
05-11-2008, 10:34 PM
bump from the dead.

$18,500 takes it. I just want my 848 already

AJ
05-11-2008, 11:21 PM
I want to have your babies!

Blitzkid
05-27-2008, 03:49 PM
haha thanks aj (i think?)

bump

Blitzkid
07-15-2008, 05:19 PM
Ok. well the riding seasons half over. and I'm going crazy still having my rx7 sitting around. So here's my desperation measure. Whole car for $16,000. Otherwise I'm going to start parting it out in a week. Help me get this! http://img99.imageshack.us/img99/3395/1098pl8.jpg (http://imageshack.us)
http://img99.imageshack.us/img99/3395/1098pl8.6f9bc2a789.jpg (http://g.imageshack.us/g.php?h=99&i=1098pl8.jpg)

Blitzkid
03-12-2009, 05:41 PM
Ending up not parting out. Taking any reasonable offers, also I will trade for a newer sportbike plus cash.

Email at fdgt42r at yahoo dot com

ij1889
03-12-2009, 11:13 PM
interesting, just checking, would $12k be to low?

Blitzkid
03-12-2009, 11:37 PM
pm sent

ij1889
03-13-2009, 04:37 PM
pm replied

niterydr
03-14-2009, 02:48 PM
Hmm...

AJ
03-22-2009, 12:05 PM
Bring car to the Dyno day, put it on the Dyno, then put a big for sale sign on it outside. Might be worth it to get it out in front of people.

Blitzkid
03-22-2009, 08:57 PM
Bring car to the Dyno day, put it on the Dyno, then put a big for sale sign on it outside. Might be worth it to get it out in front of people.

If I still have it I'll do just that. As it sits I have a buyer flying in april 6th from new york to inspect/buy the car.

AJ
03-22-2009, 09:01 PM
good to hear Jeff!