• We have updated to the newest version of the forum. Please let us know if you see any issues. And, yes, we know the shoutbox is gone. We'll see about getting it back if they make a newer version.

HID install on a 6

1Kris06

1Kris06

MAD LIGHTS YO
so i had a thought last night on the way back to school. was i supposed to tap the HID and OE ground together?, and then plug both back into the OE ground. becuse since i pulled the OE low beam ground out, none of my other lights work either, sans my 194 drl's. and i figured out the highbeam icon, for some reason when i have my fog switch 'on' the highbeam icon comes on.
i'm assuming that by pulling the OE low ground out that the ground for ALL the lights is interrupted and thats why the highs and fogs don't currently work.

also, they don't seem to 'shoot' as far as my halogens did. this could be because of A) i didnt do the anti glare mod yet and B) haven't aimed my lights yet.
 
Z

ZoomZoom Diva

New Member
I'm guessing it's the aiming. I instantly noticed how much farther down the road I could see. I would also recommend NOT doing the anti-glare mod.
 
D

DrWebster

Guest
Are you using a relay harness, or just plugging the HID ballast straight into the low beam headlight connector?
 
1Kris06

1Kris06

MAD LIGHTS YO
DrWebster said:
Are you using a relay harness, or just plugging the HID ballast straight into the low beam headlight connector?
Click to expand...
my kit came with a harness, but didn't think i would need it cuz its a 35w kit. so they are just plugged in.

and i did do the anti glare mod/aimed and my lights are HELLA bright now.

i just moved into a new place and don't have the interwebz :(. i'm going to attempt to solve my other electrical problems when i get my car tinted at AJ's the first weekend of august. (seeing as how an apartment parking lot isn't ideal for working on your car)
 
You must log in or register to reply here.
Top