Protege Wiring information

[micahlarson]

2003 mazda protege
I take no liability for the wiring information


Radio Information :

Battery = Blue/Red (+)
Accessory = Blue/Black (+)
Ground = Black/Yellow (-)
Illumination = Red/Black (+)
Dimmer = N/A
Dash will accept = Double Din
Max Radio Depth = 8 Inch
Ant. Location = Windshield Pillar
Ant. Type = Standard
Ant. Adapter = No
OEM Rad Security = Coded
CD Changer Ctrl = Yes
Speed Ctrl Vol = No

Front Speakers:

Front Location = Front doors
Speaker Size 6x8" with tweet
Speaker Depth = 3.75"
Left (+) = Violet
Left (-) = Blue/orange
Right (+) = Yellow/Blue
Right (-) = Violet/White

Rear Speakers:

Rear Doors or Deck depends on model MSP is rear doors only

Speaker Size = 6x8 for MSP and 6x9 for non MSP
Left (+) =Yellow
Left (-) =Orange
Right (+) = Green/Orange
Right (-) = Green/Black

 

[speed_addict]

On the MSP there are also holes cut in the back deck if you want to put speakers there as opposed to the rear doors.

 

[micahlarson]

yup yup I actually just took out the entire shelf with the amp and sub mounted on it this morning and now I have to nice big gaping holes into my trunk right now.. and the factory amp only puts out 125 rms @ 14.4 volts no good... so low!